The WP-580TXRD is an extended range HDBaseT twisted pair wall plate transmitter for HDMI signals. The WP-580TXRD inputs HDMI signals and converts them into an HDBaseT twisted pair signal that it transmits to a WP-580RXRD receiver.
Maximum data rate - 10.2Gbps (3.4Gbps per graphic channel) in normal mode; 4.95Gbps (1.65Gbps per graphic channel) in ultra mode.
HDTV compatible
HDCP compliance
HDBaseT™ technology
HDMI support - deep color, x.v.Color™, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD and CEC
3D pass-through
EDID PassThru - passes EDID signals between the source and display
2K and 4K support in normal mode
System range - up to 130m (430ft) normal mode; up to 180m (590ft) ultra mode (1080p @60Hz @24bpp) when using BC-HDKat6a cables
Cable - for optimum range and performance using HDBaseT™, use Kramer's BC-HDKat6a cable. Note that the transmission range depends on the signal resolution, source and display used. The distance using non-Kramer CAT 6 cable may not reach these ranges
Indicators - status LEDs for input, output, link and power
2-gang wall plate
Audio - E
Includes power supply
Applications:
Projection systems in conference rooms, boardrooms, auditoriums, hotels and churches, production studios.
Receiver/Transmitter Cable Type - Twisted Pair
Receiver/Transmitter Format Type - HDMI
Supported Resolution - 2K (2048x1080)
Supported Resolution - 4K (4096x2400)
Warranty - Yes
HDBaseT - Yes
Spec Sheet available - Yes
Bandwidth:
10.2Gbps (3.4Gbps per graphic channel)
Depth:
1.29 in
Height:
3.12 in
Outputs:
1 HDBaseT twisted pair RJ-45 connector
Storage Temperature:
-40° to +70°C (-40° to 158°F)
Width:
4.88 in
Regulatory Compliance:
HDCP
Inputs:
1 HDMI connector
Humidity:
10% to 90%, RHL non-condensing
DC Voltage:
5 Volts
COMPLIANCE WITH HDMI STANDARD:
supports HDMI and HDCP