Pro AV Catalog
Draper, Inc. - SmartTrim
Draper, Inc. - SmartTrim Draper, Inc. - SmartTrim Draper, Inc. - SmartTrim
Request Quote
All Products
draper

SmartTrim™ for Barco UniSee® Video Walls

Series: SmartTrim™ for Barco UniSee®

Model: SmartTrim

  • Standard kits include: 2x2, 3x3, 4x4, 2x4, & 3x4 configurations.
  • Elegant trim for a wide range of configurations.
  • Textured matte black or white standard; other colors available.
  • Easily installed after the Barco UniSee video wall has mounted.
  • Design protected.
Compare
Project List
Product Info
Documents

SmartTrim is constructed of 0.08" (2 mm) aluminum and hardware of 11-gauge 0.118" (3.0 mm thick) steel, with a textured powder coat finish. Available in black, white or optional custom colors. Each trim section extends past the display edge no more than 4.53" (115mm) once installed. SmartTrim's design allows for smaller packaging, ease of handling by one person during installation and service, and simple expansion when adding more displays.

SmartTrim connection assembly hardware attaches to each Barco UniSee wall cross using the Barco service tool provided with the system. No other are tools are necessary. Trim is easily attached with guiding pins to ensure a proper fit and clicks securely into place with powerful magnets. Trim edges are padded with soft foam to help protect the UniSee displays.

Lower trim panel flanges are vented to allow for convection cooling. Vents are 2.45" x 0.24" (62 x 6 mm) with 0.35" (9 mm) spacing between the vent slots. Side trim panel flanges will be vented when the video wall array is greater than three displays high. Top trim panels do not include flanges to allow for maximum air flow, but are available as an option. Please note: it is the installer's responsibility to ensure the Barco UniSee video wall is installed correctly and always operating within Barco's published specifications for ambient conditions.

Standard trim flange depth is based on a flush wall-mount installation and allows for a nominal 0.25" (6.4 mm) gap between the trim and the wall.

Standard trim depth is 2.82" (71.6 mm). If the UniSee video wall installation requires structural mounting support (e.g., plywood backing or Unistrut), additional flange depth will be needed and may be supplied upon request.

Patent information: available at www.draperinc.com/legal/patents

Downloadable 3-part specifications: available at www.draperinc.com

  • Standard kits include: 2x2, 3x3, 4x4, 2x4, & 3x4 configurations.
  • Elegant trim for a wide range of configurations.
  • Textured matte black or white standard; other colors available.
  • Easily installed after the Barco UniSee video wall has mounted.
  • Design protected.
 
Request Quote